Infinity Test Nomogram

Field-based estimation of VO₂peak, equivalent power and MAS from laps per minute

Archived software (Version 1.0): 10.5281/zenodo.17718092

Inputs

Enter the total number of laps completed during the test (using the laps counting rule described in the Infinity Test set-up section).
Default is 180 s for the standard 3-min all-out Infinity Test. If the participant stopped earlier, enter the actual duration.
Automatically computed from total laps and duration above. You can fine-tune this value if needed.
Use the actual Infinity Test lap distance in your protocol (e.g., 24.4 m).
VO₂∞ model: 461 × laps·min⁻¹ (95% CI: 405–517)

Individual results

VariableValue
VO₂∞ (mL·min⁻¹)
VO₂∞ low 95% (mL·min⁻¹)
VO₂∞ high 95% (mL·min⁻¹)
VO₂∞ (mL·kg⁻¹·min⁻¹)
VO₂Ergo (mL·min⁻¹)
Equivalent power (W)
MAS (m·s⁻¹)
MAS (km·h⁻¹)

MAS-based training zones

ZoneIntensitySpeed (km·h⁻¹)
Easy / aerobic≈ 90% MAS
Reference100% MAS
High intensity≈ 110% MAS
Target VO₂∞ → required Infinity speed
Required laps/min and MAS are recomputed for the current body mass.

Required speed: – laps·min⁻¹

Equivalent MAS: – km·h⁻¹ (– m·s⁻¹)

Export & follow-up

#DateAthleteLaps/minMass (kg)VO₂∞ (mL·kg⁻¹·min⁻¹)MAS (km·h⁻¹)

Nomogram

Very low Low–moderate Good–excellent
Coloured bands = aerobic fitness zones (based on VO₂∞ in mL·kg⁻¹·min⁻¹) recomputed for the current body mass.
Solid line = mean prediction, grey band = 95% CI, red dot = current input.
Left axis = VO₂∞ (mL·min⁻¹); right axis = VO₂∞ (mL·kg⁻¹·min⁻¹) for the current body mass.

Infinity Test – set-up schematic

The Infinity Test is performed on a flat rectangular area using the athlete’s own manual wheelchair:

  1. Place two cones 10 m apart along the long axis of the area.
  2. Overall width ≈ 3 m; ensure ≥ 10 m clearance above and below the path.
  3. The athlete follows a continuous “figure-eight” path between the cones.
  4. Measure the lap distance of the full ∞ loop (e.g., 24.4 m).
  5. Record the total number of laps over the test duration (standard: 3 min) and let the tool compute mean laps·min⁻¹.

Laps computation rule. At test termination, any incomplete “∞” loop is converted proportionally: if the remaining portion is ≥ 50% of a full loop, it is rounded up; if it is < 50%, it is rounded down. For example, about one quarter of a loop is counted as +0.5 laps (i.e., 1.5 total laps).

Infinity Test setup schematic